Dynamic Electricity Tariffs: How They Work and Who Benefits

Published:

With a classic electricity contract, you pay the same price for every kilowatt hour, whether the sun is shining at noon or gas plants are running in the evening. A dynamic electricity tariff works differently: the energy price follows the wholesale market and changes throughout the day. This guide explains how such tariffs are structured, what the rules say and what to watch out for. Where national details matter, we use Germany as the main example.

What is a dynamic electricity tariff?

EU law describes a dynamic electricity price contract as one that reflects price variations on the spot markets, including the day-ahead market, at intervals at least equal to the market settlement frequency. German law uses essentially the same definition.

In practice, your price per kilowatt hour combines the relevant day-ahead spot price with fixed components. How the spot price is set is explained in What is the day-ahead spot price?.

Typical structure

  • Variable energy price: the day-ahead price for each hour or quarter-hour.
  • Fixed per-kWh mark-ups: network charges, levies, taxes and the supplier’s margin.
  • Standing charge: a fixed monthly fee, often in addition to metering costs.
  • VAT on the total.

Because the fixed components make up a large share of the final price, your actual price fluctuates less in percentage terms than the bare wholesale price. See What makes up the retail electricity price?.

EU level

The EU Electricity Directive (EU) 2019/944 requires member states to allow suppliers to offer dynamic price contracts. Customers with a smart meter must be able to sign one with at least one supplier and with every supplier that has more than 200,000 final customers. Each country implements this in national law, so availability and details vary.

Germany: Section 41a EnWG

In Germany, the rules are in Section 41a of the Energy Industry Act (EnWG). The obligation initially applied only to large suppliers and was extended in stages. Since 1 January 2025, all electricity suppliers must offer a dynamic tariff to final customers who have a smart metering system.

Points to note:

  • The obligation is to offer such a tariff. The Federal Network Agency points out that freedom of contract still applies, so a supplier does not have to sign a contract with every applicant.
  • Suppliers must inform customers about the costs, opportunities and risks of dynamic tariffs.
  • Customers without a smart metering system cannot rely on the obligation.

The German legal text is available at gesetze-im-internet.de (in German). Laws are amended regularly, so the current version always applies.

Requirement: a smart metering system

To bill your consumption per period, the supplier needs to know when you used how much electricity. This requires a smart metering system that records interval data and transmits it securely. In Germany, that means a digital meter plus a certified smart meter gateway; a digital meter without a gateway is not sufficient. Read more in Smart meters and dynamic tariffs.

Opportunities: when a dynamic tariff can pay off

A dynamic tariff can be worthwhile if you can shift a meaningful part of your consumption in time. Good candidates include:

  • Electric cars charged overnight or at weekends. See Charging an EV cheaply.
  • Heat pumps, especially with a buffer tank or a well-insulated building.
  • Home batteries that can be charged when power is cheap.
  • Appliances with a delay timer, such as washing machines, dishwashers or dryers.

A dynamic tariff also rewards using electricity when plenty of renewable power is available, which can help balance the system.

Risks: what to consider

  • Price spikes: Wholesale prices can rise sharply, especially on calm winter evenings. If you need a lot of power then and cannot shift it, you pay more.
  • Less predictability: Monthly costs are harder to forecast than with a fixed price.
  • Extra costs: Standing charges, mark-ups and metering costs can eat into the savings.
  • Effort: Without automation, such as a wallbox with scheduling, it is tedious to use the cheap periods consistently.
  • Billing details: Some tariffs bill on quarter-hour prices, others on hourly or monthly averages for certain consumption.

For households with low consumption and little flexibility, the potential benefit is often small, and a fixed tariff may be the simpler choice.

What to check in the contract

  • How high are the standing charge and the per-kWh mark-up?
  • Is billing based on quarter-hour or hourly prices?
  • Is there a price cap or other protection?
  • What are the term and notice period?
  • Who operates the meter, and what does it cost?
  • Is there an app or interface to see prices and control devices?

How to use this website

Day-ahead prices for the following day appear in the early afternoon. On the Germany electricity price page you can see today’s prices and – once available – tomorrow’s, along with the cheapest contiguous time windows. This helps you plan when to run large loads.

Conclusion

Dynamic electricity tariffs pass wholesale price signals on to households. In Germany, every supplier has had to offer one to customers with a smart metering system since 2025. Whether switching pays off depends mainly on how flexible your consumption is and how high the tariff’s fixed costs are.

Note: This guide is general information only and does not constitute legal, financial or energy advice. We do not recommend specific suppliers. No guarantee of accuracy.

Frequently asked questions

Does every supplier in Germany have to offer a dynamic tariff?
Under Section 41a of the German Energy Industry Act (EnWG), all electricity suppliers have been required since 1 January 2025 to offer a dynamic tariff to final customers with a smart metering system. According to the Federal Network Agency, this does not create a right to a contract with any particular supplier.
Do I need a smart meter for a dynamic tariff?
Yes. Billing by the hour or quarter-hour requires a smart metering system that records and transmits consumption per period. In Germany, a plain digital meter without a communication gateway is not enough.
Is a dynamic tariff always cheaper?
No. Whether it pays off depends on how much consumption you can shift to cheap periods, how wholesale prices develop and what standing charges and mark-ups the tariff includes.
Can my electricity price become negative on a dynamic tariff?
The wholesale price can turn negative, but the final price usually does not, because network charges, levies and taxes still apply. The energy price can, however, be very low at those times.